Centurian

Centurian

PART
NUMBER

PICTURE
(IF AVAILABLE)

DESCRIPTION

COST

PART #
04402

1/4" CLEAR NYLON AIR TUBING

SOLD BY THE: 100 FOOT ROLL ONLY

PART #
04402A

3/8" CLEAR NYLON AIR TUBING

PART #
04402C

SEE ABOVE
PICTURE

1/2" CLEAR NYLON AIR TUBING

ORDER
PART #
1J-013-10

1/8" GREEN AIR ASSIST TUBING
6" LONG USED WITH SOLENOID VALVE #VL0402CF
USED WITH BARBED AIR FITTING #80-1050-00

ORDER
PART #
11224-B
8010013B

WITH BARBED END
SEE: #40217 FOR
NYLON FOOT

A.E.R.O.

2.5" THREADED BARBED STUD
(FOR SCRN. CLAMPS) 3/8-16 X 2.5" (with barb)
3" AND 4" STUDS AVAILABLE

ORDER
PART #
11224-C
8010013C

A.E.R.O.

3" THREADED STUD (FOR SCRN. CLAMPS)
3/8-16 X 3" (WITH BARB)
Used on 168082A screen clamp & 13106A SQ/FLD. CLAMP

ORDER
PART #
11225 BY:
AERO

KNOB & THREADED STUD & CUP ASSEMBLY
(REGULAR STYLE) For screen clamps
3/8-16 X 2-1/2" STUD = #11224-B
WITH #KN-1 = KNOB WITH #40217 = CUP

ORDER
PART #
11225A

A.E.R.O. KNOB & THREADED STUD & CUP ASSEMBLY
(REGULAR STYLE) FOR SCREEN CLAMPS
3/8-16 X 3" STUD = #11224-C
WITH #KN-1 = KNOB WITH #40217 = CUP

ORDER
PART #
11581

Registration GRID DECAL
1-1/8" SQ. MADE IN USA

ORDER
PART #
11605A
1011005A

IDEC SY4S-02F1

SY4S-02F1 RELAY HOLD DOWN SPRING
FOR 2-POLE RELAYS

ORDER
PART #
11605-I
1011005

IDEC RH2B-UL-AC120V

RH2B-UL-AC120V CONTROL RELAY DPDT, 120-VAC COIL, WITH LED USE RELAY BASE #11676

ORDER
PART #
11606B
01220101

NCC K1F-10-562

K1F-10-562 TIMER .1 - 10- SEC . 24-VDC ON DELAY USE TIMER BASE #16662B
USE 1-MEG. POT. #11671
For Other NCC Timers - Click Here

OBSOLETE

ORDER
PART #
116182

OBSOLETE

PRINT HD. - FLD / PRINT SPD. CONTROL
MOD. POT. - 20-K .250" DIA. PLASTIC SHAFT USED WITH KNOB #53695

REPLACED BY: 116182R

SOLD
OUT

ORDER
PART #
116182R

PRINT HD. - FLD / PRINT SPD. CONTROL
MOD. POT --20-K ROUND, 250" Dia. Metal shaft
USED WITH KNOB 53695 #RV4NAYSD203A

PART #
116183

OBSOLETE

MOD. POT.   10-K
SQUARE BODY,        .250" DIA. PLASTIC SHAFT
USED   WITH KNOB   53695
#72AIN056S103U REPLACED BY:   116183R

WHILE
THEY
LAST

PART #
116183R
(W156006)

MOD. POT. 10-K ROUND .250" DIA, METAL SHAFT USED WITH KNOB 53695

PART #
116320H REPLACED
BY:
116320HR

OBSOLETE

A11101SSAO SPD. BOARD   FOR CENTURION INDEXER
VARI-SPEED 2000
1-HP,   120-VAC INPUT,   90VDC OUTPUT
6.5" X 5" FLAT BASE PLATE MADE IN USA USED WITH TWO 10-K MOD. POT.
USED WITH MDA-20 FUSE   # F20DT250
Core Credit Available

SOLD
OUT

ORDER
PART #
116320HR REBUILT
116320H

REBUILT

SPD. BOARD (FOR INDEXER)
VARI-SPEED 2000 (REBUILT 116320H) Core Credit Available MADE IN USA

EXCHANGE
WHEN IN
STOCK

PART #
116320HS1

DANFOSS

IMPROVED VERSION
used with
two 10-k mod. pot.

SPD. BOARD FOR   CENTURION   INDEXER
VARI-SPEED 2000     (A1101A000)
1-HP, 120-VAC INPUT,        90-VDC OUTPUT 8" X 5" HEAT SINK BASE
SAME ELECTRONIC BOARD AS 116320H, BUT ON
A LARGER   HEAT SINK BASE,   A BETTER   AND
LONGER LASTING UNIT                 MADE IN USA

PART #
116320M

OBSOLETE
SEE: 116320M4

MM22001A SPD. BOARD FOR CENTURION HEAD

N/A
OBSOLETE

PART #
116320M4

USED WITH TWO 20-K
MOD. POT. ON
CENTURIAN HEADS

MM23001C SPD. BOARD FOR CENTURION HEAD
120/240-VAC INPUT. DUAL VOLTAGE
90/180-VDC OUTPUT For Other Speed Controllers - Click Here

PART #
116320T

SPEED CONTROL TEMPLATE
1-5/8 X 1-5/8 WITH 3/8" DIA. HOLE

ORDER
PART #
116321

SWITCHCRAFT L-11

...L-11 SAFETY RECEPT. - FEMALE #L-11

PART #
1163211
1018000A

for .295" dia. cable

...280 SAFETY PLUG- MALE

PART #
1163221
7006000

SSR-20 STRAIN RELIEF BUSHING (EARLY MODELS)
FOR SAFETY CORDS #SSR-20

ORDER
PART #
1163221T
7006000T

STRAIN RELIEF BUSHING TOOL

PART #
11633

IDEC RH4B-UL-AC120V

RH4B-UL-AC120V 120 - VAC 4 - POLE CONTROL RELAY

PART #
11649A

120 - VOLT GREEN INDICATOR LITE
FLUSH LENS, WITH 6" LEADS

PART #
11668A

SEE ABOVE PICTURE

120 - VOLT YELLOW INDICATOR LITE
FLUSH LENS, WITH 6" LEADS

PART #
11669A

SEE ABOVE PICTURE

120 - VOLT RED INDICATOR LITE
FLUSH LENS, WITH 6" LEADS

PART #
11664M

12TS95-5 START / AUTO TOGGLE SWITCH
3-POSITION, SPADE TERMINALS MOM.-OFF-ON

ORDER
PART #
11664MS
1010007

START / AUTO TOGGLE   SWITCH
3-POSITION,    SCREW TERMINALS
MOM.-OFF-ON       #8832K6

PART #
11671

OBSOLETE

MOD. P0T. 1-MEG.
SQUARE BODY, .250" DIA PLASTIC SHAFT USED WITH TIMER #11606B #72AIN056S105U MADE IN MEXICO

WHILE
THEY
LAST

ORDER
PART #
116751P

IDEC SH1B-05

..SH1B-05 1 - POLE RELAY BASE USED WITH RELAY R10121P

ORDER
PART #
11676
(1011006)

SH2B-05 2 - POLE RELAY BASE

ORDER
PART #
11682-I

IDEC RH2B-UL-AC24

RH2B-UL-AC24V 2 - POLE CONTROL RELAY 24 - VAC COIL
WITH LED USED WITH RELAY BASE 11676

ORDER
PART #
11693

OHMITE 296-0025

...296-0025 RESISTOR MTG. BRACKET #12
FOR RESISTORS #R25001 & R101050

ORDER
PART #
12636X

HONEYWELL BZ-2R5551-A2

-BZ-2R5551-A2 MICRO LIMIT SWITCH
SCREW TERMINALS, W / DUST COVERED PLUNGER

PART #
12637X

HONEYWELL AD5721R

AD5721R ACTUATOR FOR MICRO LIMIT SWITCH #12636X

PART #
13106A BY:
A.E.R.O.

KWIK CLAMP      (SQ / FLD. BAR CLAMP)
WITH KN-1 KNOB,     NYLON FOOT
WITH 3/8-16 X 3" THREADED STUD #1125-C
FITS   MACHINES WITH 1" HOLDER BAR
(FOR CLAMPS WITH STEEL FEET--SEE: 27015 OR 27015A For Other Clamps -Click Here

PART #
13106B

KWIK CLAMP BASE ONLY
COMES WITH A 3/8-16 TAPPED HOLE

ORDER
PART #
1311012-B

1/4" NPT PORTS
BIMBA
FOR TRUNNION MTG.
FOOT SEE: D-14937

AIR CYLINDER   (FOR SQ/FLD.    1" STROKE,
1.5" BORE,     TRUNNION   MTG.,      Dbl. Acting     (USE COMP. SPRING    #CS281206)
    (USE NYLON BUSHING #BNY0806)     REPLACEMENT TRUNION FOOT - D-14937
    REPLACEMENT SOCKET BOLT   - SC103208     USED WITH AIR FITTING Y90404LB    #BFT-171-D     For Other Cylinders - Click Here

PART #
1311012-S

1/8" npt ports
TRUNNION MTG.

1.50TFDSR1.0 AIR CYLINDER (FOR SQ/FLD)
1" STROKE, 1.5" BORE DBL. ACTING (USE COMP. SPRING #CS281206)
(USE NYLON BUSHING #BNY080

WHEN
IN
STOCK

ORDER
PART #
136022-R

REBUILT

REBUILT PROGRAMMER

EXCHANGE - EXCHANGE - EXCHANGE
Core Credit Available

EXCHANGE

ORDER
PART #
136021
01100104

C&K PUSH BUTTON SWITCH (ONLY)
ON- (ON) METAL STEM,

ORDER
PART #
136021ASS

COMPLETE PUSHBUTTON SWITCH ASSEMBLY
COMES WITH PUSHBUTTON, CAP, GUARD AND
LOCKING NUTS AND WASHERS

PART #
136021G

SMALL NEW STYLE

CHROME GUARD - NEW STYLE (SMALL) USED WITH .310" DIA. PUSHBUTTON CAPS

PART #
136022G

.310" DIA

GREEN PUSHBUTTON CAP (SMALL) USED WITH P.B. SWITCH #136021

PART #
136022R

.310" DIA

RED PUSHBUTTON CAP (SMALL) USED WITH P.B. SWITCH #136021

136021GBN

CHROME GUARD - NEW STYLE (LARGE) LARGE NEW STYLE
USED WITH .398 DIA. PUSHBUTTON CAPS

ORDER
PART #
136022GB

.398" DIA

GREEN PUSHBUTTON CAP (LARGE) USED WITH P.B. SWITCH #136021
USED WITH CHROME GUARD #136021GBN .398" DIA.

ORDER
PART #
136022RB

.398" DIA.

RED PUSHBUTTON CAP (LARGE) USED WITH P.B. SWITCH #3136021
USED WITH CHROME GUARD #136021GBN .398" DIA.

PART #
1360221

OBSOLETE

SPECIAL PROGRAMMER LIMIT SWITCH
V - SHAPED ON LEVER END REPLACED BY: 1360221A

PART #
1360221A

SPECIAL PROGRAMMER LIMIT SWITCH U - SHAPE ON LEVER END

PART #
136029

DIODE
600-V, 1-AMP #1N4005

ORDER
PART #
1360391
01115103

LC1D12008G6 CONTACTOR (FOR PRINT HEADS)
120-VOLT COIL, 2-NO. 2-NC. 32-AMP

ORDER
PART #
136039B
01115102

LC1D25008G6 CONTACTOR (FOR INDEXER)
120-VOLT COIL, 2-NO, 2-NC. 40-AMP.

ORDER
PART #
136090

ICM-BB30 LOGIC BOARD -- BARE BONES
7-32 VDC I/O, FOR TERMINAL JUMPER SEE: TS00541

EXCHANGE

PART #
136090R
REBUILT

REBUILT

SEE ABOVE PICTURE

LOGIC BOARD -- BARE BONES
#ICM-BB-30
FOR TERMINAL JUMPER SEE: TS00541 Core Credit Available

EXCHANGE

136093X

OBSOLETE

REPLACED BY #136093XA2

MINI - MAX LOGIC BOARD --M3R1 6" X 4" Core Credit Available

EXCHANGE
WHILE
THEY
LAST

PART #
136093M2

OBSOLETE

MINI - MAX LOGIC BOARD --M2 REPLACED BY: 136093XA2
Core Credit Available

EXCHANGE

PART #
136093XA2

MINI - MAX LOGIC BOARD--A2R1 IMPROVED VERSION Core Credit Available
MADE IN USA

ORDER

PART #
136098B

ENERGY + BATTERY (FOR SLC-500 PLC) 1747-BA

OBSOLETE

PART #
136098C

ALLEN BRADLEY

Core Credit Available

I/O   BLOCK FOR CENT. HEAD
24VDC,      8-I/O, SERIES B       #1791-IOBA
9-PIN ON 1ST PLUG
ALSO SEE: #653408    &   IO10624

EXCHANGE

136098CR
REBUILT

SEE ABOVE
PICTURE
Core Credit Available

I/O BLOCK FOR CENT. HEAD
24VDC, 8 - IN, 8 - OUT SERIES A #1791-IOBA REBUILT

EXCHANGE
WHEN IN
STOCK

PART #
136098E

6-PIN ON 1ST PLUG

1746-OB16 16 - POINT OUTPUT MODULE SLC-500 SERIES
SERIES B 10 - 50 VOLT DC Core Credit Available

EXCHANGE

ORDER
PART #
136098L

TOUCH SCREEN

1747-L524 CPU MODULE W/4-K CAP. SLC - 500 CPU Core Credit Available

EXCHANGE

136098F

FUSE 1.6-AMP 5 X 20mm

PART #
14634A

CUTLER HAMMER EMG. STOP SWITCH (LARGE)
RED MUSHROOM HEAD WITH TWO CONTACT BLOCKS #14634CB (4-NC.) FITS 30-mm HOLE

ORDER
PART #
14634B

SEE ABOVE
PICTURE

EMG. STOP SWITCH (LARGE)
RED MUSHROOM HEAD WITH ONE CONTACT BLOCK #14634CB (2-N.C.)

PART #
14634CB

.CUTLER HAMMER

CONTACT BLOCK
FOR EMG. STOP SW. #14634A & 14634B

PART #
146341

IDEC AB6-M-Y1R

AB6-M-V1R EMG. STOP SWITCH - SPDT
PUSH TO LOCK, TWIST TO RELEASE

PART #
146342

....704-075.2 EMG. STOP SWITCH (SMALL)
(WITHOUT CONTACT BLOCK) USE CONTACT BLOCK #146342CB2 (2-NC)

PART #
146342CB1

13-14 23-24

704-9103 CONTACT BLOCK 2-NO GREEN For Other Switch - Click Here

PART #
146342CB2

11-12 21-22

704-9104 CONTACT BLOCK 2 NC RED
(FOR EMG. STOP SWITCH #146342

PART #
146374
01150101

SAINT WIEN LC6MDR COUNTER 6-30 VDC

SOLD
OUT

PART #
156020A

HONEYWELL 3PA6

MICRO..

..3PA6 LIMIT SWITCH ENCLOSURE (USED WITH #12636X & 126367X)

161012LAS

LEFT HAND SIDE

A.E.R.O.

COMPLETE FRONT CHOPPER
ASSEMBLY NICKEL PLATED

PART #
161012RAS

RIGHT HAND SIDE

COMPLETE FRONT CHOPPER
ASSEMBLY NICKEL PLATED

161015

A.E.R.O.

INNER CHOPER TUBE
1" SQUARE NICKEL PLATED USED WITH 161161L & 161161R)

161033

A.E.R.O.

CHOPPER HEIGHT ADJUSTING STUD
(OLD STYLE) 7/16-20 THREADS, 4-1/2' LONG USED WITH OLD STYLE KNOBS #161034

161034 BY: AERO

ALUM. (OLD STYLE) CHOPPER KNOB USED WITH OLD STYLE CHOPPER HEIGHT
ADJUSTMENT STUD #161033

PART #
161037

A.E.R.O.

CHOPPER HEIGHT ADJUSTING STUD USED WITH NEW STYLE BLACK KNOBS 7/16-20 THREADS & 3/8-16 THREADS 3-1/2" LONG

161161LAS

BY:
AERO

COMPLETE LEFT REAR CHOPPER
ASSEMBLY - NICKEL PLATED
WITH:   ALUM. KNOB,       #161034
              OUTER CHOPPER   #161161LR
              INNER CHOPPER    #161015
              LOCK LEVER          #KL51859
              ADJUSTING STUD #161033

161161RAS

BY:
AERO

COMPLETE RIGHT REAR CHOPPER
ASSEMBLY - NICKEL PLATED
WITH: ALUM. KNOB        #161034
             OUTER CHOPPER   #161161RR
             INNER CHOPPER    #161015
             LOCK LEVER          #KL51859
             ADJUSTING STUD   #161033

161161LF
161012

FRONT OUTER CHOPPER TUBE
NICKEL PLATED
MADE IN USA

PART #
161161LR

A.E.R.O. LEFT REAR OUTER CHOPPER TUBE
NICKEL PLATED
REAR / FOR AIR CYLINDERS

PART #
161161RR

see above
picture

RIGHT REAR OUTER CHOPPER TUBE
NICKEL PLATED
REAR / FOR AIR CYLINDERS

PART #
161162L

A.E.R.O. .

CARRAIGE SIDE PLATE - LEFT
6" X 8" MADE IN USA

PART #
161162R

SEE ABOVE
PICTURE

CARRAIGE SIDE PLATE - RIGHT
6" X 8" MADE IN USA

PART #
162014A

IDLER PULLEY (FOR TIMING BELT)
ALUM. 21-TEETH 3/8" PITCH, .5" BORE
WITH (2) TWO #B082207 BEARINGS

SOLD
OUT

ORDER
PART #
162015

TIMING DRIVE PULLEY (FOR TIMING BELT)
ALUM. 21-TEETH, 1" BORE
MADE IN USA

ORDER
PART #
162015S

TIMING DRIVE PULLEY (FOR TIMING BELT)
STEEL 21-TEETH, 1" BORE MADE IN USA

16210

A.E.R.O.

ALUM. PALLET CLAMP 3/8" HOLE

PART #
16211

A.E.R.O.

ALUM. PALLET GUIDE
3/8-16 BEVELED TAPPED HOLE (ALSO IN 5/16")

PART #
162307

1/2 - 20 THREADS

PALLET ARM HEIGHT ADJ. STUD
RIGHT AND LEFT HAND THREADS

ORDER
PART #
1623072

YOKE 1/2 - 20 THREADS USED WITH ADJ. STUD 163307

PART #
1630704

OBSOLTE

..EK71EAOO-KS6-KGI SOLENOID VALVE 120-VAC, 3/8" NPT PORTS REPLACED BY: #1630704A

PART
NUMBER

PICTURE
(IF AVAILABLE)

DESCRIPTION

COST

ORDER
PART #
1630704A

EK71EAOO- 120- VOLT SOLENOID VALVE
3/8" NPT PORTS USED WITH FEMALE RECEPT. VL0402CFFR

ORDER
PART #
1640091

TL-8 LEVERLER FOOTPAD
1/2 -13 THREADS 2" OF THREADS 1-1/8" OAL

ORDER
PART #
1642435

NICKEL PLATED
HEAT TREATED

A.E.R.O. V-FORK WITH 3/8" WIDE SLOTS
9 - 1/4" TALL X .987" WIDE X 5/8" THICK ON SOME MACHINES MAY REQUIRE
7/8" CAM FOLLOWERS

1642435A

A.E.R.O. V-FORK WITH 1/2" WIDE SLOTS
9-1/4 TALL X 2" WIDE X 5/8" THICK

ORDER
PART #
16662B

3 - POLE TIMER BASE
SR-3B-05

ORDER
PART #
168080B

ALUM. BASE ONLY, FOR SCREEN CLAMPS
WITH 3/8 - 16 TAPPED HOLE
FOR STUDS SEE: 11224-C OR T3821

ORDER
PART #
168082A

A.E.R.O.TM SCREEN CLAMP      (OLD STYLE)
   3/8-16   X   3" BARBED STUD == 11224-C
    1-1/8" DIA. STEEL KNOB      == KN-1
    NYLON (FOOT CUP) WASHER = 40217 For Other Clamps - Click Here

ORDER
PART #
168082B

A.E.R.O.

SCREEN CLAMP
3/8-16 X 3" BARBED STUD == 11224-C
1-3/4" DIA. 4 - STAR KNOB == DK-62
NYLON CUP (FOOT) WASHER = 40217

ORDER
PART #
168083

A.E.R.O.TM SCREEN CLAMP   (NEW STYLE)
3/8-16   X 2.5" #T3821 KNOB AND STUD
USE   # LR-38N NYLON CUP

168083X

SEE ABOVE PICTURE

SCREEN CLAMP (NEW STYLE)
3/8-16 X 1.75" #T3811 KNOB & STUD USED WITH #LR-38N NYLON CUP (FOOT)

ORDER
PART #
168090

A.E.R.O. SCREEN CLAMP
3/8-16 X 3" STUD &
1-1/8" DIA. STEEL KNOB 3KN-1
COMES WITH FREE SPINNING STEEL FOOT

ORDER
PART #
18212218
1622624

ALUM. MICRO LOCK WASHER
3/16" THICK, 1-3/4" DIA. USED WITH LOCK LEVER #KL616F3

ORDER
PART #
18212321

A.E.R.O. CARRAIGE DRIVE SHFT COUPLING
5/8" BORE TO 1" BORE, 4" LONG
PRE DRILLED FOR ROLL PIN USED WITH REDUCER RD5713

ORDER
PART #
18212323

A.E.R.O. ALUM. TIMING DRIVE PULLEY
21 - TEETH, 5/8" BORE, 3/8" PITCH FOR USE WITH TIMING BELT #TB000612
(FOR 1" BORE SEE: 162015)

18212324

A.E.R.O.
SEE ABOVE PICTURE

STEEL TIMING DRIVE PULLEY
21 - TEETH, 5/8" BORE, 3/8" PITCH FOR USE WITH TIMING BELT #TB000612

PART #
1821248A

A.E.R.O.

COMES WITH
NYLON FOOT #40217

REAR SCREEN HOLDER CLAMP
( THE TYPE THAT BOLTS ON )
2.25" X 1" X 3/8" NICKEL PLATED USED WITH TWO 10-24 BUTTON HEAD BOLTS
For Other Clamps - Click Here

1821282

3/4 X 3"

ROD CLEVIS PIN (HI-LIFT) USED WITH CLEVIS PIN #1821286
USED WITH TWO COLLARS. #CL12409

SOLD
OUT

ORDER
PART #
1821286

A.E.R.O. ROD CLEVIS FOR AIR CYLINDER (HI-LIFT) USED WITH CLEVIS PIN #1821282 4.75"L X 1.75"W X 1.5" H

SOLD
OUT

18223300

WOODEN PALLET TIP
7-3/4" LONG (AOL)

PART #
18223301

WOODEN PALLET TIP
9" LONG (AOL)

PART #
1841038

V-FORK ADJ. SHOCK
6.25" OAL. 1" WIDE
3/8" TAPPED HOLES ON BOTH ENDS

SOLD
OUT

ORDER
PART #
18427412

A.E.R.O.

THREADED BASE PLATE (HI-LIFT)
3/4" THREADED HOLE, 2 X 1-3/8 X 1/2 USED WITH SOCKET CAP BOLT #SC42024 NICKLE PLATED
(BASE PLATE FOR #18427413)

PART #
18427413

A.E.R.O.

THREADED HOUSING      (HI-LIFT PULL PIN)
3/4"   THREADS     NICKEL PLATED
USED WITH #18427413            USED WITH #18427412
FOR JAM NUT   SEE: JN-12

PART #
18427414

A.E.R.O.

1/4-20 THREADS

PLUNGER   (FOR HI-LIFT   PULL PIN)
NICKEL PLATED
FOR COMP. SPRING   SEE: CS328038
FOR PULL KNOB        SEE:   401218   OR   401218S

PART #
186003

E-PROM PROGRAMMED CHIP
FOR CENTURIAN HEAD

PART #
1860032

E-PROM PROGRAMMED CHIP
FOR CENTURIAN HEAD
USED: WITH BARE BONES BB-30 ICM BOARD

PART #
186005

E-PROM PROGRAMMED CHIP
FOR CENTURIAN INDEXER
USED WITH: BARE BONES BB-30 ICM BOARD

PART #
186006

E-PROM PROGRAMMED CHIP
FOR CENTURIAN HEAD
USED WITH: M-3 ICM OR A2R1 BOARD

PART #
186007

E-PROM PROGRAMMED CHIP
FOR CENTURIAN INDEXER
USED WITH M-3 ICM OR A2R1

PART #
186500H

A.E.R.O.

10 PIN WIRE HARNESS
For Centurian Head at Carraige Limit Switch &
DC Motor Power Leads In Junction Box located
On The Side of Carraige Motor
#206036-1 on side of standard sex square FLANGED receptacle

PART #
1870362

A.E.R.O.

PALLET TIP SUPPORT BRACKET
WITH NYLON SLIDE SURFACE

PART #
2003055

1/8" STRAIGHT GREASE FITTING

PART #
2012027

MOSIER SCM-3 FLOW CONTROL VALVE & MUFFLER 3/8" NPT

PART #
2012027A

FLOW CONTROL VALVE & MUFFLER 1/8" NPT.

ORDER
PART #
2012027B

FLOW CONTROL VALVE & MUFFLER 1/4" NPT.

PART #
2012027C

MOSIER SCM-4 FLOW CONTROL VLAVE & MUFFLER 1/2" NPT.

ORDER
PART #
2014000

MUFFLER
1/4" NPT.

ORDER
PART #
2014001

MUFFLER 3/8" NPT.

ORDER
PART #
2014002

MUFFLER 1/8" NPT.

ORDER
PART #
27015 BY: AERO

KWIK    (SQ. / FLD.)   BAR CLAMP
WITH:   1" FREE SPINNING STEEL FOOT
WITH:   DK-25, (3" BLACK KNOB)     ALSO SEE: #13106A
For Other Clamps - Click Here

ORDER
PART #
27015A

MFG. BY: A.E.R.O.

KWIK (SQ. / FLD.) BAR CLAMP
WITH: 3/4" FREE SPINNING STEEL FOOT
WITH: DK-25, (3" BLACK KNOB) ALSO SEE: 13106A

PART #
27015B

BY: AERO

MFG. BY: A.E.R.O.

KWIK (SQ. / FLD.) BAR CLAMP
WITH: KN-1 STEEL KNOB
WITH: 3/4" FREE SPINNING STEEL FOOT ALSO SEE: 16106A

PART #
27015C

A.E.R.O.

KWIK (SQ. / FLD.) BAR CLAMP
WITH 3033001 BLACK KNOB
WITH 3/4" FREE SPINNING STEEL FOOT ALSO SEE: 13106A

PART #
27015-BASE

KWICK CLAMP ALUM. BASE ONLY
WITH A 3/8-16 THREADED HOLE

PART #
3003000

3/8 - 16 X 1" FLANGED SERRATED BOLT

PART #
3003002

3/8 - 16 X 3/4" FLANGED SERRATED BOLT

3033020

THROW THE WRENCH AWAY 4-STAR KNOB
(FOR REAR SCREEN OFF CONTACT LOCK
1-1/4" DIA. 1/4-20 THREADS DK-81

ORDER
PART #
4011054

NAS2200-N01-S V - FORK FLOW CONTROL VALVE
1/8" NPT #NAS2200-NO1-S SOMETINES USED WITH BUSHING Y90402B

4011054A

FLOW CONTROL VALVE

1/8" NPT #FQP-2

PART #
401212

2SC100 1" ID. SPLIT COLLAR
(FOR HI-LIFT AIR CYLINDER

PART #
401218

3/4" DIA. BLACK PLASTIC KNOB,
FOR HI-LIFT PULL PIN, 1/4-20 TAPPED INSERT

PART #
401218S

RIED KKT-2A 1" DIA. BLACK STEEL KNOB
FOR HI - LIFT PULL PIN, 1/4-20 TAPED INSERT THESE DON'T BREAK LIKE THE PLASTIC ONES DO!

PART #
40217

NYLON FOOT (OLD STYLE)
FOR KWIK CLAMPS 13106A & 168082A

SAVE

PART #
40217-25

NYLON FOOT (OLD STYLE)
BAG OF 25 YOUR COST .80 EA.

PART #
40217-50

NYLON FOOT (OLD STYLE)
BAG OF 50 YOUR COST .70 EA.

SAVE

PART
NUMBER

PICTURE

DISCRIPTION

COST

PART #
40217-100
BAG OF 100

NYLON FOOT (OLD STYLE)

BAG OF 100 YOUR COST .60 EA.

SAVE

PART #
40217S1

LONGER LASTING

J. W. WINCO STEEL TOGGLE CLAMP FOOT CAN BE USED ON VARIOUS CLAMPS IN PLACE
OF NYLON FOOT #40217 IF BARB IS REMOVED. HAS 3/8-16 THREADED HOLE, 3/4" DIA.

ORDER
PART #
405115

HUMPHREY 31-V

31-V AIR TOGGLE SWITCH ON-OFF

4348652
6508001

BY:

2-PC. SQUEEGEE HOLDER ANY SIZE UP TO 144" SOLD BY THE INCH.

/
INCH

SAVE

4348660
6508000

BY:

FLOOD BAR ANY SIZE UP TO 144"
SOLD BY THE INCH.

SAVE

43-WT-16

16" WINGTIP FLOOD BAR
STAINLESS STEEL BLADE ATTACHMENT 12" @ 64.00 18" @ 73.00

PART #
40831K

1021-1000 AIR LIMIT SWITCH W / O FOOT
(FOR 30 X 40 JUMBO MACHINES)
USED WITH MUFFLER #2014002

ORDER
PART #
506-30Y

A.E.R.O.

30" YELLOW SAFETY CORDS
TIP TO TIP

PART #
506-36Y

A.E.R.O.

36" YELLOW SAFETY CORDS
TIP TO TIP

SAFETY YELLOW

PART #
506-42HDO

SAFETY ORANGE 42" HEAVY DUTY SAFETY CORDS

506-XXX-Y

SAFETY CORDS YELLOW IN COLOR
MADE TO ORDER
STATE LENGTH TIP TO TIP

PART #
53680

SNAP IN PLUG DOT AIR VENT
STAINLESS STEEL MESH SCREEN

SOLD
OUT

PART #
53695

KNOB FOR MOD. POT.
FITS .250" SHAFT

PART #
54-1199-0
7017000

MOBIL 1 - QT.    OIL.    10-WT,   NON-DETERGENT
AIR LUBRICANT OIL    WARNING: DO NOT USE WD-40 OR
     MARVEL   MYSTERY OIL ON
     ANY AIR CYLINDER OR SOLENOID   VALVE

PART #
54-1200-1
7017004

MOBIL 1 - QT. SYNTHETIC GEAR LUBE

54-1200-3

TRI-FLOW TEFLON   LUBRICANT     12-OZ. CAN
   WARNING: DO NOT USE   WD40 ON
                                   ANY AIR CYLINDER OR
                                  SOLENOID VALVE!

54-1200-5
7018017

WHITE LITHIUM GREASE
14-OZ TUBE FOR GREASE GUN

ORDER
PART #
653408

I/O BLOCK FOR CENT. HEAD
24-VDC. DIN RAIL MTG. #1794-ASB2, SERIES B
ALSO SEE: 136098C Core Credit Available

EXCHANGE

ORDER
PART #
701523

AIR - MITE V4108 ALL OVER PALLET AIR FOOT SWITCH

PART #
718001

4-STAR NORTH / SOUTH MICRO
REGISTRATION KNOB
WITH NYLON TIP 1/2-20 THREAD

PART #
76201300A
(2019003A)

2" DIA. AIR GUAGE
1/4" NPT, CENTER BACK CONNECTION
0-160 PSI #18-013-209

76401019
OBSOLETE

...F08-400-A3DA 1/2" NPT AUTO DRAIN FILTER
METAL BOWL WITH SIGHT GLASS
(WITH 1/2" THREADED AIR INLET INSERTS)
1/4" NPT PORTS FOR AIR GUAGE

WHILE
THEY
LAST

PART #
76401020

OBSOLETE

...R08-400-RGMA AIR REGULATOR
1/2" NPT AIR INLET PORTS USED WITH LARGE MTG. NUT 917131A

WHILE
THEY
LAST

76401024

OBSOLETE

B08-497-M3MA

FILTER / REGULATOR
WITH 1/2' THREADED INSERTS
1/4" NPT PORTS FOR AIR GUAGE

WHILE
THEY
LAST

80-1050-00

BARBED AIR FITTING
10-32 THREADS X 1/16" FOR GREEN TUBING
FOR GREEN AIR ASSIST TUBING #1J-013-10 USED WITH SOLENOID VALVE #VL0402CF

917111

OBSOLETE

..F11-200-A3DA AUTO DRAIN FILTER
(WITH METAL BOWL AND SIGHT GLASS)
1/4" NPT AIR INLET PORTS
1/4" NPT PORTS FOR AIR GUAGE

WHILE
THEY
LAST

917111A

OBSOLETE

NORGREN AUTO DRAIN FILTER
(PLASTIC BOWL WITH METAL COVER)
1/4" NPT. AIR INLET PORTS
1/4" NPT PORTS FOR AIR GUAGE
#F11-200-A3PA

WHILE
THEY
LAST

ORDER
PART #
91713

R07-200-RNKA

MINI - SQ / FLD. AIR REGULATOR
1/4" NPT. AIR INLET PORTS,
1/4" NPT PORTS FOR AIR GUAGE

PART #
917131

FOR MINI
REGULATOR 91713

2962-89 MTG. LOCK NUT (SMALL SIZE)

PART #
917131A

NORGREM 5191-88

5191-88 MTG. LOCK NUT (LARGE SIZE)
FOR AIR REGULATOR 917132

917132

OBSOLETE

R08-200-RGMA MAIN AIR REGULATOR
1/4" NPT AIR INLET PORTS
1/4" NPT PORT FOR AIR GUAGE USED WITH LARGE #917131 LOCK NUT

WHILE
THEY
LAST

PART #
91718

2" DIA. AIR GUAGE
CENTER BACK CONNECTION WITH TWO
U-CLAMP MOUNTING STUDS
1/8" NPT, 0-30 PSI #P844U-30

PART #
917181

UNITED STATES GUAGE AIR GUAGE 2" DIAL
CENTER BACK CONNECTION
0-100 PSI, 1/8" NPT #P844UK

PART #
917182

SEE ABOVE
PICTURE
BOSTON GEAR

AIR GUAGE 1-1/2" DIAL
CENTER BACK CONNECTION
0-60 PSI 1/8" NPT #E61-ICO60

PART #
B061806

NICE 1614DC

1614DC BEARING 3/8" BORE X 1-1/8" OD.

B1633RB
3023008

1" BORE ROLLER BEARING
#ER-16
TWO SET SCREW IN INNER COLLAR

ORDER
PART #
BNY0806

THOMPSON WHITE NYLON SPLIT BUSHING
(FOR SQUEEGEELIZER AIR CYLINDER)
1/2 X 11/32

PART #
BNY1212

SEE ABOVE PICTURE

THOMPSON WHITE NYLON SPLIT BUSHING
(FOR SQUEEGEELIZER AIR CYLINDER SPRING)
3/4 X 3/4 USED WITH CS281203

PART #
CF12087X

V - FORK
McGILL CFE-3/5-SB

...CFE - 3/4 -SB CAMFOLLOWER - ECCENTRIC 3/4" ALLEN SOCKET For Other Camfollowers - Click Here

PART #
CF12614

McGILL CF-3/4-SB

...CF-3/4-SB 3/4" CAMFOLLOWER- V-FORK
ALLEN SOCKET

PART #
CF16-05
03230101

1" CAMFOLLOWER -REGISTRATION
ALLEN SOCKET #CF-1-SB

PART #
CF16088X
03230105

1" CAMFOLLOWER -ECCENTRIC
ALLEN SOCKET #CFE-1-SB

CF20125

1-1/4" CAMFOLLOWER -T-BAR CRANK
ALLEN SOCKET #CFH-1-1/4-SB HEAVY DUTY SHAFT
USED WITH JAM NUT #JN-1216

PART #
CF20125C

..CCFH - 1-1/4-SB 1-1/4" CROWNED CAMFOLLOWER HEAVY DUTY SHAFT

PART #
CH0425

35403757 NO. 25 CHAIN (PROGRAMMER) 1/4" PITCH SOLD IN 10-FT. LENGTHS

PART #
CH0840

6261K157 NO. 40 CHAIN (HI-LIFT CYLINDER)
1/2" PITCH SOLD IN 10-FT LENGTHS

PART #
CH0425H

#25 MASTER LINK (PROGRAMMER)
FOR NO. 25 CHAIN

PART #
CH0840H

#40 MASTER LINK (HI-LIFT CYLINDER)
FOR NO. 40 CHAIN

PART #
CH0840-OS

#40 OFFSET LINK

PART #
CH-CB02

CHAIN BREAK TOOL
#25 THRU #50 CHAIN

CL06306

3/8" ID. COLLAR

PART #
CL12409

SEE ABOVE
PICTURE

3/4" ID. COLLAR
USED WITH CLEVIS PIN #1821282

PART #
CO0009C

#206966-1 CABLE CLAMP SHELL SIZE 13 For Other Amp Connectors - Click Here

PART #
CO00013RF

#206705-2 9 PIN FREE HANGING RECEPT.
STANDARD SEX, SHELL SIZE 13

PART #
CO00014P

#206708-1 STD. SEX FEMALE-PLUG
9-PIN, SHELL SIZE 13

ORDER
PART #
CO00015P

STD. SEX FEMALE-PLUG
16-PIN, SHELL SIZE 17 #206037-1

CO00015P-J

SEE ABOVE
PICTURE

JUMPER PLUG
#206037-1 WITH JUMPER WIRE

PART #
CO00016RM

STD. SEX SQUARE FLANGED RECEPT.
16 - PIN, SHELL SIZE 17 #206036-1 For Other Amp Connectors - Click Here

PART #
CO00017RM

#206705-1 STD. SEX SQUARE FLANGED RECEPT.
9-PIN MALE, SHELL SIZE 13

PART #
CO00019RM

SEE ABOVE
PICTURE

STD. SEX SQUARE FLANGED RECEPT.
24 - PIN, MALE,SHELL SIZE 23 #206838-1

PART #
CO00019P

#206837-1 STD. SEX FEMALE-PLUG
24 - PIN, SHELL SIZE 23

PART #
CO0001PNG

GOLD PLATED MALE CRIMP PINS
#1-66361-1, 512-1338

PART #
CO0001PN

SEE ABOVE
PICTURE

TIN PLATED MALE CRIMP PINS
#1-66361-0, 512-1297

PART #
CO12SPNG

GOLD PLATED FEMALE CRIMP SOCKET PINS
#1-66360-1, 512-1329

CO-SOCKET

SEE ABOVE
PICTURE

TIN PLATED FEMALE CRIMP SOCKET PINS
#1-66360-0, 512-1325

CO000CR

CRIMPING TOOL
#90287-1, 512-8615

PART #
CO000EX

EXTRACTION TOOL
#305183, 512-9140

CS281206

COMP. SPRING (FOR SQUEEGEELIZER)
1.75" L X .75" D X .060W
USED WITH #1311012 AIR CYLINDER

CS328038

COMP. SPRING (FOR HI-LIFT PULL PIN)
1" LONG X 1/2" WIDE
USED WITH: 18427413

PART #
CY1808SX-C
(AC1704)

For Other Cylinders
- click Here

AIR CYLINDER (FOR SCRN. FRAME CLAMPS)
1-1/4" BORE,   1/2" STROKE, NOSE   MTG.
SINGLE ACTING,     SPRING RETURN
#S-9-1/2                            MADE IN USA

PART #
CY1950B

OBSOLETE

1-3/8-12 MTG. THREADS
CLEVIS MTG.

...EADP-30-4 AIR CYLINDER (HI-LIFT)
DBL. ACTING, 3" BORE, 4" STROKE
USED WITH CLEVIS 1821286
WITH REAR TANG

N/A
SPECIAL ORDER

PART #
CY1950C

SEE ABOVE
PICTURE

ADP-24-4 AIR CYLINDER (HI-LIFT)
3" BORE, 4" STROKE, DBL. ACTING

PART #
CY3224DRB
02090102

DOUBLE ROD
1-1/4 - 12 MTG. THREADS

BOSTON GEAR AIR CYLINDER     (HEAD UP / DOWN)
3" STROKE,       2" BORE          DBL. ACTING
WITH CUSHION ADJUSTMENT - BOTH ENDS
#E15-20DR4-1030       1/4-18 NPT. AIR PORTS

N/A
SPECIAL ORDER

PART #
CY3224DRC

SEE ABOVE
PICTURE
DOUBLE ROD
1-1/4 - 12 MTG. THREADS
1/4-18 NPT PORTS

DR-16-3-BR AIR CYLINDER (HEAD UP / DOWN)
3" STROKE, 2" BORE DBL. ACTING,
WITH CUSHION ADJUSTMENTS- BOTH ENDS USED WITH LOCK NUT ..... CY32508N
USED WITH LOCK WASHER CY32508W

CY32508N
2009032

MTG. NUT
1-1/4-12 UNF-2B THREADS #E15-20BX1-9001 USED WITH CY3224DRB OR CY3224DRC

CY32508W

MTG. LOCK WASHER USED WITH USED WITH MTG. NUT CY32508N
CY3224DRB OR CY3224DRC

PART #
CY4044DP
02090103

STAINLESS STEEL ROD
CLEVIS MTG.

...EADP25-5.5-SS AIR CYLINDER (HI-LIFT)
2.5" BORE, 5.5" STROKE, DBL. ACTING, USED WITH CLEVIS 1821286

part #
CY4044DPR

U - CUP PISTON
1" LONGER
CLEVIS MTG.

EADP25-5-5-BRUSS AIR CYLINDER        (HI-LIFT)
1.5" BORE,       5.5" STROKE,         DBL. ACTING
CUSHION BOTH ENDS,      STAINLESS STEEL ROD
USED WITH FLOW CONTROL VALVES -- 1" LONGER

PART #
D-14937

FOR TRUNNION MTG.
BLOCK SEE: 1311036

MOUNTING TRUNNION FOOT
FOR CYLINDER 1311012-B USED WITH SOCKET CAP BOLT SC103208

EL0420
3012000

1/4 - 20 ELASTIC LOCK NUT
( FOR REAR OFF CONTACT LOCK) FOR UPGRADE SEE: 3033020

ORDER
PART #
F01DT25

1 - AMP CERAMIC MDA FUSE MDA-1
1/4" X 1-1/4"

ORDER
PART #
F20DT250

20 - AMP CERAMIC MDA FUSE MDA-20
1/4" X 1-1/4" USED WITH SPEED BOARD 116320HR

PART #
F08DT25

8-AMP FUSE 9/16" X 2" FRNR-8

F10DT250
576122

10-AMP FUSE 9/16" X 2" FRNR-10 USE FUSE HOLDER #586062

PART #
HH081332

NYLON BOLT (HEAD REST)
1/2-13 X 2" LONG

PART #
IO10624R REBUILT

OBSOLETE

REBUILT

ALLEN BRADLEY I / O BLOCK (FOR CENT. HEAD)
1791-10BB    SERIES A,          9-PIN 1ST PLUG
10 INPUTS,   6 OUTPUTS
ALSO SEE: 136098C   OR    653408 Core Credit Available

EXCHANGE

PART #
JN-12

JAM NUT FOR HI-LIFT PLUNGER HOUSING
3/4" THREADS

PART #
KKT-3B

SKT-026 1-1/2 DIA. STEEL KNOB
3/8-16 THREADED BLIND HOLE USED ON CLAMPS

PART #
KL42019M1

LOCK LEVER (OFF-CONTACT)
1/4-20 X 1-1/8" LONG STUD
SEE: 17W07302 FOR NYLON WASHER.

ORDER
PART #
KL51859

LOCK LEVER (CHOPPER LOCK)
5/16-18 X .59" LONG STUD
SEE: WS05122-B FOR SPACER

PART #
KL616118

LOCK LEVER (REAR SCRN. HOLDER)
3/8-16 X 1.18 LONG STUD

ORDER
PART #
KL61659

SEE ABOVE
PICTURE

J.W. WINCO LOCK LEVER (REAR SCRN. HOLDER)
3/8-16 X .59" LONG STUD

PART #
KL616F3

FEMALE LOCK LEVER (MICRO LOCK)
3/8-16

PART #
KN-1

3/8-16 TAPPED HOLE

1-1/8" DIA. STEEL KNOB USED WITH CLAMP #168082A
USED WITH CLAMP #13106A

PART #
LR-38N

3/4" NYLON FOOT (CUP)
FOR NEW SERIES SCREEN CLAMPS
USED WITH T3821 & T3811

ORDER
PART #
M0311DC-B

MOTOR    FOR PRINT HEAD
1/3-HP.     90-VDC        CDP3320
56C FRAME,     1750-RPM,      TENV

PART #
M0511DF-B
01080102

CDP-3330 1 / 2 - HP MOTOR 90 - VDC
56C FRAME, 1725-RPM TENV USE MOTOR BRUSH #MB05B

M0711DF-B
01080103

CDP-3440 3 / 4 - HP MOTOR FOR INDEXER
90VDC 56C FRAME TENV

PART #
M1012DF-B

CDP-3445 1 - HP MOTOR FOR INDEXER
90-VDC TENV

PART NUMBER	PICTURE	DISCRIPTION	COST
ORDER PART # MB05B	3/16" TERM. END	MOTOR BRUSH T01 ON BRUSH 5/8" WIDE X 7/32" THICK X 1" LONG USED WITH: MO311SC-B (1/3 - HP) M0511DC-B (1/2 - HP)
PART # MB05B1	1/4" TERM. END	MOTOR BRUSH D05363 ON BRUSH 5/8" WIDE X 7/32" THICK X 1" LONG FOR BOSTON BOSTON GEAR & BALDOR MOTORS ONLY
PART # MB10B		MOTOR BRUSH (SPLIT BRUSH) 1-HP 33306 ON BRUSH WITH COIL SPRING 5/8" WIDE X 5/16" THICK X 1" LONG FOR BOSTON GEAR & BALDOR MOTORS ONLY
ORDER PART # MB10-I		MOTOR BRUSHES WITH SPADEFORK 682 OR E19 ON BRUSH .75 WIDE X 3/8" THICK X 1-1/8" TALL FOR BOSTON GEAR MOTORS ONLY
PART # MB10BX		MOTOR BRUSHES (SOLID BRUSH) 1-HP PO8 OR 631 ON BRUSH 5/8 X 5/16 X 13/16 FOR BOSTON GEAR & BALDOR MOTORS ONLY
PART # PBNBLKAB		MISS PALLET PUSHBUTTON BLACK PUSHBUTTON SWITCH USED WITH CONTACTS 800E-4X10 N.O. CONTACTS 13.00 800E-4X01 N.C CONTACTS 13.00
PC029LB (Y90402LB)	SEE: Y90402LB	AIR FITTING - SWIVEL ELBOW 90 - DEGREE, 1/8" NPT, 1/4" TUBING
PC03FLH		RED COIL AIR HOSE 3/16" X 12 FT. 1/4" NPT. SWIVEL FITTINGS ON BOTH ENDS
PART # PWRSP247		24 - VDC, 7.2 AMPS. POWER SUPPLY #HE24-7.2 14" X 4.87" X 3.53"
ORDER PART # PS244		POWER ONE HD24-4.8A 24 - VDC, 4.8 - AMPS POWER SUPPLY 9" X 4-7/8" X 3-3/8" ALSO SEE: W156038
ORDER PART # R10121P	IDEC RH1B-AC120V	RH1B-AC120V CONTROL RELAY 1 - POLE, 120-V COIL USED WITH RELAY BASE 116751P
PART # R1502RH		RH2B-UL-DC24V CONTROL RELAY 2 - POLE, 24 -VDC COIL USE RELAY BASE 11676
PART # R1512DC	IDEC RH2B-UL-DC-120V	RH2B-UL-DC-120V CONTROL RELAY 2-POLE DPDT, 12-VDC COIL WITH LED USE RELAY BASE #11676 For Other Relays - Click Here
PART # R20122PD AE5X487		DAYTON DPDT OPEN FACE CONTACTOR 120 - VOLT COIL
R25001	OHMITE L25J1RO	L25J1RO RESISTOR 1-OHM, 25-WATT (USE MTG. BRACKET #11693)
ORDER PART # RD5713	USED WITH COUPLING 18212321	...713-5-B5-H REDUCER (PRINT HEAD GEAR BOX) REGULAR GEAR LUBE 5 TO 1 RATIO For Other Reducers - Click Here
RD5713S SPECIAL ORDER	SEE ABOVE PICTURE	GEAR REDUCER (PRINT HEAD GEARBOX) 5 : 1 RATIO, SYNTHETIC GEAR LUBE #F713-5S-B5-H
PART # RT012101	NCC K1F-10-566	K1F-10-566 TIMER 10 - SEC. 12-VDC USE A REMOTE POT. USE TIMER BASE #16662B For Other NCC Timers - Click Here
PART # RT012102		K1F-10-666 TIMER 10 - SEC. WITH BUILT IN POT. 12VDC USE TIMER BASE #16662B
PART # RT12030		K1F-30-561 TIMER 30 -SEC. 120-VAC USE REMOTE MOD. POT. USE TIMER BASE #16662B
PART # RT24010		K1K - 10 - 662 TIMER 10 - SEC. WITH BUILT IN POT. 24-VDC USE TIMER BASE #16662B
SB32410 SB102410		SOCKET BUTTON HEAD BOLT 10-24 X 5/8 LONG THREADS
SC103208 D-2178	. BIMBA D-2178	SOCKET CAP BOLT 10-32 X 1/2 LONG THREADS USED WITH TRUNNION FOOT D-14937
PART # SC042024		SOCKET CAP BOLT (FOR HI-LIFT BASE PLATE #18427412) 1/4-20 X 1.5" LONG THREADS
PART # SC052424	FOR REGISTRATION ADJUSTMENTS	67468009 SOCKET CAP BOLT 5/16-24 X 1.5" LONG THREADS
PART # SS0606		ALLEN SHOULDER BOLT 3/8" WIDE X 1" LONG
PART # SS0820		91259A714 ALLEN SHOULDER BOLT (PIVOT LEVER) 1/2" WIDE, X 1-1/4" LONG
PART # SW00015		LRA911-RS-B/ (HEAD ON) ROCKER SWITCH--RED LITED 120-VAC SPDT (HEAD ON)
PART # SW00016	SEE ABOVE PICTURE	(DBL. PRINT) ROCKER SWITCH--RED LITED 24-VAC SPDT, (DBL. PRINT.) #LRA511-RS-B/
PART # SW2X464 (1010011)		2FA54-73 TOGGLE SWITCH SPST ON-OFF, 1/2" MTG. HOLE 2 SCREW TERMINALS FREE INDEX, HI-LIFT
PART # SW2X466 (1010013)		2FC54-73 TOGGLE SWITCH SPDT ON-OFF-ON, 1/2" MTG. HOLE 3 SCREW TERMINALS
ORDER PART # SW2X467 (1010003)	CARLING 2GK54-73	2GK54-73 TOGGLE SWITCH DPST ON - OFF 4 SCREW TERMINALS
PART # SW2X468		2GL54-73 TOGGLE SWITCH DPDT ON -/- ON 6 SCREW TERMINALS
PART # SW2X469		2GM54-73 TOGGLE SWITCH DPDT ON - OFF - ON 6 SCREW TERMINALS
PART # SWP1040	For Other Prox. Sw. - Click Here	E2F-X10F1 PROX. SWITCH (CARRAIGE SENSOR) 30-mm ROUND 12-24-VDC PNP - NO 3-WIRE BLUE-BROWN-BLACK
PART # SWP1040A	SEE ABOVE PICTURE 30 - mm ROUND	...922AB4XM-APP-L PROX. SWITCH (CARRAIGE SENSOR) PNP - NO	N/A
PART # SWP1040B	SEE ABOVE PICTURE	SCAN FCMI-3010P-A3U2 PROX. SWITCH (CARRAIGE SENSOR) 30-mm ROUND, 10-30 VDC PNP 3-WIRE: BLUE - BROWN - BLACK
PART # SWP1040C	SEE ABOVE PICTURE	ELECTROMATIC PROX. SWITCH (CARRAIGE SENSOR) 30-mm ROUND, 10-40 VDC #EI-3010PNOS PNP
PART # SWP1055 01105101	SEE ABOVE PICTURE	...922AA4XM-A9N-L PROX. SWITCH (CARRAIGE SENSOR) 30-mm ROUND - SHIELDED, 9-55 VDC 3-WIRE: BLUE - BROWN - BLACK NPN-NO
PART # SWP1055A	SEE ABOVE PICTURE	ELECTROMATIC...EL-3010NPOS PROX. SWITCH (CARRAIGE SENSOR) 30-mm ROUND, 10-40 VDC, NPN-NO 3-WIRE BLUE - BROWN - BLACK
PART # SWP120	EFECTOR	PROX. SWITCH FOR V-FORK 20-250 VAC OR DC 18-mm WIDE ORANGE IN COLOR #IG-2005-ABOA
NUMBER	PICTURE	DISCRIPTION	COST
PART # SWP2408B		PROX. SWITCH
PART # SWP2408BKT NBN5-F7-E2	FOTEX	RETRO FIT FOR SWP 1030 PROX. SWITCH (CARRAIGE DRIVE) 10 - 30 - VDC, #PS-08P 3 - WIRE BLUE - BROWN - BLACK
PART # T-3811		KNOB & STUD (FOR NEWER STYLE SCREEN CLAMPS) 3/8-16 X 1.75" USE NYLON FOOT #LR-38N
PART # T-3821	SEE ABOVE PICTURE	KNOB & STUD (FOR NEWER STYLE SCREEN CLAMPS) 3/8-16 X 2.5" USED WITH NYLON FOOT #LR-38N
PART # T001202	DORMEYER DCT40-120	DORMEYER DCT40-120 40 - VA CONTROL TRANSFORMER 120 / 24 - VOLT
ORDER PART # T51210 SPECIAL		CONTROL TRANSFORMER - SPECIAL WITH PLUG PART OF ICM LOGIC BOARD 120/10-V, 5-VA. #DCT-5-120-SPEC
PART # T51210-X	SEE ABOVE PICTURE	DORMEYER DCT-5-120 CONTROL TRANSFORMER WITHOUT PLUG 120/10-V, 5-VA.
PART # TB000612 03400103		TIMING BELT 3/8-PITCH, 3/4" WIDE NYLON CORDS, LO75 SOLD BY THE FOOT
PART # TB000612K		TIMING BELT 3/8-PITCH, 3/4" WIDE KEVLAR CORDS SOLD BY THE FOOT
PART # TB000612S	SEE ABOVE PICTURE THE BEST	TIMING BELT 3/8-PITCH, 3/4" WIDE STAINLESS STEEL CORDS SOLD BY THE FOOT
PART # TS00541 OBSOLETE		TERMINAL JUMPER FOR BARE BONES LOGIC BOARD
PART # VB454LB		V-BELT - INDEXER DRIVE 48" TYPE "B"
PART # VL0402CF	120-VOLT 1/8" NPT PORTS	EM900002 SOLENOID VALVE AIR ASSIST USED WITH GREEN TUBE #1J-013-10 USED WITH BARBED FITTING #80-1050-00
PART # VL0402CFB	OBSOLETE	..EMHOICDA14ALJA SOLENOID VALVE 120-V COIL, 1/8" NPT PORTS REPLACED BY VLO402CFB2	OBSOLETE REPLACED BY VL0402CFB2
PART # VL0402CFB1	OBSOLETE	MHOICDA14ALJA SOLENOID VALVE 120-V, 1/8" NPT PORTS #MHOICDA14ALJA REPLACED BY VL0402CFB2	OBSOLETE REPLACED BY VL0402CFB2
PART # VL0402CFB2		.V60P513AA218XX SOLENOID VALVE 120 - VOLT, 1/8" NPT. PORTS
PART # VL0402CFN	SEE ABOVE PICTURE	SOLENOID VALVE 120-V 1/8" NPT SPRING RETURN--AIR ASSIST #EHOICDA74ALJA
PART # VL0402CFNN		SOLENOID VALVE 120-V 1/8" NPT HAS SMALL SIZE RECEPT. EXTERNAL PILOT #MHOICDA74AMJA
VL0402CFFM	SMALL SIZE	54473-01 3 - WIRE FEMALE CORD RECEPT. USED WITH ALL THE ABOVE SOLENOIDS
PART # VL0402CFFR		3 - WIRE FEMALE CORD RECEPT. USED WITH #1630704A (LARGE SIZE)
PART # W156006 116183R		10 - K ROUND MOD. POT. .250" DIA. STEEL SHAFT USE KNOB #53695
PART # W156035		5 - K ROUND MOD. POT. .250" DIA. STEEL SHAFT
PART # W156038		*SLS - 12 - 034* POWER SUPPLY 12 - VDC, 3.4-AMPS ALSO SEE: PS244
ORDER PART # W156055-KJ	MAC 45A-AA2-DAAJ-1KJ	..45A-AA2-DAAJ-IKJ 1/8" NPT SOLENOID VALVE 120-VOLT COIL WITH FLOW CONTROL ADJUSTMENTS
W156073	120 - VAC 18 - mm ROUND NO DELAY	ALL OVER PRINT SENSOR WIRES = RED - WHITE - BLACK- #7252AD2X3ASX OR #7252CD2X3ASX
PART # W606407	SMC NVS-4314-0209F	...NVS-4314-0209F V - FORK SOLENOID VALVE (WITH BASE) 2-COILS, 120-VOLT, 1/4" NPT
PART # W606407B		BASE, FOR V- FORK SOLENOID VALVE 1/4" NPT. PORTS USED WITH W606407
ORDER PART # W606407NB		...NVS-4314-0009F V - FORK SOLENOID VALVE (WITHOUT BASE) USED WITH BASE: W606407B 2 - COILS, 120-VOLT, 1/4" NPT
WN06112		NYLON WASHER 3/8 ID X 11/16 OD X 1/8
WN06141	SEE ABOVE PICTURE	NYLON WASHER 3/8 ID X 7/8 OD X 1/16
WN06142	SEE ABOVE PICTURE	NYLON WASHER 3/8 ID X 7/8 OD X 1/8
PART # WN08161	SEE ABOVE PICTURE	NYLON WASHER 1/2" ID. X 1" OD. X 3/32" THICK
WN10182	SEE ABOVE PICTURE	NYLON WASHER 5/8" ID. X 1-1/8" OD. X 1/8" THICK
WS05122-B		SPACER - FOR CHOPPER LOCK LEVER #KL51859 5/16" D X 3/4" OD X 1/4" THICK
PART # Y904C		1/4" NPT. BRASS COUPLING USED WITH FLEX HOSE PC03FLH #207P-4
PART # Y904N		1/4" NPT. BRASS NIPPLE 1.38" LONG #216P-4
PART # Y90402B		BRASS REDUCER BUSHING 1/4" NPT DOWN TO 1/8" NPT
PART # Y90402BT		BRANCH TEE AIR FITTING 1/4" TUBING, 1/8" NPT
PART # Y90404BT	SEE ABOVE PICTURE	BRANCH TEE AIR FITTING 1/4" TUBING, 1/4" NPT
PART # Y90604BT	SEE ABOVE PICTURE	BRANCH TEE AIR FITTING 3/8" TUBING, 1/4" NPT
PART # Y90806BT	SEE ABOVE PICTURE	BRANCH TEE AIR FITTING 1/2" TUBING, 3/8" NPT
PART # Y90808BT	SEE ABOVE PICTURE	BRANCH TEE AIR FITTING 1/2" TUBING, 1/2" NPT
PART # Y90402CK		MALE CONNECTOR AIR FITTING 1/4" TUBING, 1/8" NPT
PART # Y90406CK	SEE ABOVE PICTURE	MALE CONNECTOR AIR FITTING 1/4" TUBING, 3/8" NPT
PART # Y90402LB PC029LB		SWIVEL ELBOW AIR FITTING 1/4" TUBING, 1/8" NPT
PART # Y90404LB		SWIVEL ELBOW AIR FITTING 1/4" TUBING 1/4" NPT
PART # Y90406LB	SEE ABOVE PICTURE	SWIVEL ELBOW AIR FITTING 1/4" TUBING, 3/8" NPT
PART # Y90606LB	SEE ABOVE PICTURE	SWIVEL ELBOW AIR FITTING 3/8" TUBING. 3/8" NPT
PART # Y90402RT		MALE RUN TEE AIR FITTING 1/4" TUBING, 1/8" NPT.
Y90406LB	SEE ABOVE PICTURE	SWIVEL ELBOW AIR FITTING 1/4" TUBING, 3/8" NPT
PART # Y90606LB	SEE ABOVE PICTURE	SWIVEL ELBOW AIR FITTING 3/8" TUBING, 3/8" NPT
PART # Y90404U		UNION AIR FITTING 1/4" TUBING
PART # Y90606U	SEE ABOVE PICTURE	UNION AIR FITTING 3/8" TUBING
PART # Y90404UT		UNION TEE AIR FITTING 1/4" TUBING
PART # Y90606UT	SEE ABOVE PICTURE	UNION TEE AIR FITTING 3/8" TUBING

8 EA.	12 X 24	50.00 EA.
4 EA.	18 X 28	39.00 EA.	WITHOUT RUBBER, WITH IMPROVED GUIDE RAILS PACKAGES OF 2 EA.
8 EA.	18 X 33	105.00 EA.	46-LB ./ PKG. OF 2 EA.
2 EA.	20 X 22	75.00 EA.

WE STOCK MANY DIFFERENT TYPES OF
SQUEEGEE RUBBER FOR YOUR CENTURIAN

For Pallet Prices and Sizes - Click Here